Florida Cost Calculator

Impact Windows vs. Hurricane Shutters: Florida Cost Comparison

Florida homeowners protecting their windows usually choose between two paths: keep the existing windows and add shutters, or replace the windows with impact-rated glass. This calculator puts rough ranges for both side by side for the same openings, so you can see the size of the price gap before you talk to contractors.

Assumes $40–$100 per sq ft installed for impact windows and $15–$35 per sq ft for accordion shutters, based on commonly published cost-guide ranges. Permits are not included.

The short answer

Shutters almost always cost less up front, often a third to half of what impact windows cost for the same openings. Impact windows cost more but protect you all the time without any work before a storm, and they can also improve noise, security and energy efficiency. Which is the better deal depends on how long you plan to stay, how easy it is for you to deploy shutters, whether your existing windows need replacing anyway, and how your insurer credits each option.

Side-by-side comparison

Hurricane shuttersImpact windows
Typical installed cost$10 – $100 per sq ft depending on type$40 – $100+ per sq ft
Work before a stormPanels: significant. Accordion/roll-down: minutesNone
Protection when you are awayOnly if someone closes themAlways on
Everyday benefitsSome shade, some securityNoise reduction, UV filtering, security, possible energy savings
MaintenanceClean and lubricate tracks; motors need serviceClean glass and frames; check seals
Wind mitigation creditEligible if all openings are protected with approved productsEligible if all openings are protected with approved products

When shutters make more sense

Shutters are usually the better value when your current windows are in good shape, when budget is the main constraint, or when you plan to sell within a few years. Accordion and roll-down shutters remove most of the hassle of panels. Panels are the cheapest of all, but think honestly about whether you can lift, carry and bolt them up the day before a storm, possibly in the heat and with lines at the hardware store. If not, budget for paying someone to deploy them.

Shutters are also common in condos and rental properties, where the owner wants code-approved protection without replacing windows the association may control.

When impact windows make more sense

Impact windows are often the better long-term choice if your windows are old, single-pane or leaking, since you would be paying for new windows anyway and the extra cost for impact glass is only the difference. They also make sense for snowbirds and frequent travelers who may not be home when a storm approaches, people who cannot physically deploy shutters, and owners who want quieter, more secure homes. Many buyers in coastal Florida markets look for impact windows, though whether that translates into a higher sale price is hard to predict and varies by neighborhood.

What impact windows actually do

Impact windows use laminated glass: two layers of glass bonded to a tough plastic interlayer. When debris hits, the glass may crack but the interlayer holds it in the frame, keeping wind and rain out of the house. That matters because a broken window lets wind pressurize the inside of the house, which can push the roof up from below. Frames are reinforced and anchored to resist both impact and wind pressure. Products must carry Florida Product Approval, and in Miami-Dade and Broward a Miami-Dade NOA.

Impact glass is not unbreakable, and after a major storm a cracked unit may need replacing. It is also not a substitute for an evacuation order. Follow official guidance from your county emergency management office.

Insurance credits

Florida insurers must offer wind mitigation discounts, and the opening protection section of the state form (OIR-B1-1802) looks at whether every glazed opening is protected by approved products. Both shutters and impact windows can qualify. The key word is every: if one window or slider is left unprotected, you may not get the credit. Some forms also distinguish between protection rated for large-missile impact and lesser ratings. Ask your agent what credit your specific policy gives for each option before you decide; the answer can change the math considerably.

Energy and comfort

Many impact windows are also sold with low-E coatings and insulated frames, which can reduce heat gain from the Florida sun. Savings vary with your home, the window being replaced and your electric rates, so be skeptical of any specific savings promise. Laminated glass also blocks most UV light, which reduces fading of floors and furniture, and it noticeably cuts outside noise, which people near busy roads or airports often appreciate.

Financing and assistance

Because impact windows can run into the tens of thousands of dollars for a whole house, many Florida installers offer financing. Read the terms closely and compare with a home equity line or personal loan. Florida's PACE programs have funded hurricane-hardening projects through a property tax assessment; these can be convenient but can complicate selling or refinancing, so understand them before signing. The My Safe Florida Home program has offered matching grants for opening protection in funded years; check its official site for current status.

A mixed approach

You do not have to pick one for the whole house. A common compromise is impact glass for large sliders and hard-to-reach second-story windows, and accordion or panel shutters for the rest. Just make sure the combination still protects every opening if you want the insurance credit, and that all products are approved for your wind zone.

How to compare quotes fairly

Ask each contractor for an itemized quote by opening, with the product line, approval number, design pressure rating, glass type and whether removal and disposal of old windows, stucco repair, painting and the permit are included. Impact window quotes in particular vary a lot depending on the frame material (aluminum or vinyl) and whether the job includes interior and exterior finishing. Check licenses through the Florida DBPR, and confirm that the permit will be pulled in the contractor's name.

Ready to price shutters in more detail? Use the hurricane shutter cost calculator. Thinking about your roof too? The roof is the other half of wind mitigation; see the Florida roof replacement calculator. RV owners can also review this RV hurricane checklist.

Frequently asked questions

Do I need a permit for impact windows in Florida?

In most Florida jurisdictions, yes. Window replacement involving structural openings and approved products typically requires a building permit and an inspection. Your contractor should pull it. A permitted, inspected installation also gives you paperwork that inspectors and future buyers may ask for.

Can I install shutters myself?

Some homeowners install panel tracks themselves, but permanently mounted shutters usually need a permit, and anchors must match the approved installation instructions for your wall type. Mistakes can make the system fail in a storm and may cost you the insurance credit. Most people hire a licensed installer for the mounting hardware even if they hang the panels themselves.

How long does each option take to install?

Shutters are often installed in a day or two once the product arrives, though custom products and permits can add several weeks. Impact windows usually take longer to manufacture, and lead times grow sharply after a storm season with major damage. Ordering well before June helps.

Will either option raise my home's value?

Possibly, but it is hard to measure. Appraisals and buyer preferences vary. A safer way to think about it: both options can reduce insurance cost and storm risk while you own the home, and they are commonly listed as selling points in Florida real estate listings.